Hoses, Pipes & Fittings > Hose Fittings
Hose Tail, 1 ½” BSP Female to 1" or 1 ½” ID Hose
£3.05
Hose Tail, 90 Degree, 1 ½” BSP Male to 1 ½” ID Hose
£6.17
Hose Tail, 90 Degree, ¾” BSP Male to ¾” ID Hose
£3.29
For installations where a syphon breaker or vented loop is required, for example where sea water is being used to flush a toilet that is below the waterline.
£22.34
For installations where a syphon breaker or vented loop is required, for example where a toilet is installed below the water line and discharges to sea via a sea cock.
£30.04
Pipe to tank sealing without Welding, Flanges, Nuts, Washers, Gaskets, & O Rings, long assembly times or Leaks
£9.30
Pipe to tank sealing without Welding, Flanges, Nuts, Washers, Gaskets, & O Rings, long assembly times or Leaks
£8.36
Pipe to tank sealing without Welding, Flanges, Nuts, Washers, Gaskets, & O Rings, long assembly times or Leaks
£7.56
Pipe to tank sealing without Welding, Flanges, Nuts, Washers, Gaskets, & O Rings, long assembly times or Leaks
£5.58
Pipe to tank sealing without Welding, Flanges, Nuts, Washers, Gaskets, & O Rings, long assembly times or Leaks
£15.64
Pipe to tank sealing without Welding, Flanges, Nuts, Washers, Gaskets, & O Rings, long assembly times or Leaks
£5.96
Pipe to tank sealing without Welding, Flanges, Nuts, Washers, Gaskets, & O Rings, long assembly times or Leaks
£4.54
Pipe to tank sealing without Welding, Flanges, Nuts, Washers, Gaskets, & O Rings, long assembly times or Leaks
£24.78
Camlock 1 ½” Female Quick Release Coupling with 1 ½” hose tail.
£8.68
Boat owners constantly ask us how to eliminate toilet smells. Having made sure that sewage smells cannot permeate your sanitation hose, it is appropriate to treat the incoming flushing water to destroy the Micro-growth,..
£76.03
Boat owners constantly ask us how to eliminate toilet smells. Having made sure that sewage smells cannot permeate your sanitation hose, it is appropriate to treat the incoming flushing water to destroy the Micro-growth,..
£17.02
Are you greeted with the whiff of rotten eggs when you return to your boat after a few days away and flush the loo? This is due to a build up of hydrogen gas which is created by algae and bacteria rotting in water,..
£48.10
Are you greeted with the whiff of rotten eggs when you return to your boat after a few days away and flush the loo? This is due to a build up of hydrogen gas which is created by algae and bacteria rotting in water,..
£118.68
Designed and made in New Zealand, Tru-Design Long Thread Tails are the superior composite connection for fitting hose to threaded fittings. Tru Design Tails are moulded from a glass reinforced nylon composite. High strength,..
£2.75
Designed and made in New Zealand, Tru Design Long Thread Tails are the superior composite connection for fitting hose to threaded fittings. Tru Design Tails are moulded from a glass reinforced nylon composite. High strength,..
£5.06
Designed and made in New Zealand, Tru Design Long Thread Tails are the superior composite connection for fitting hose to threaded fittings. Tru Design Tails are moulded from a glass reinforced nylon composite. High strength,..
£7.18
Designed and made in New Zealand, Tru Design Skin Fittings with Tail are the superior composite thru-hull solution. The Skin Fitting with Tail body and nut are moulded from glass fibre reinforced nylon composite. High strength,..
£10.96
Designed and made in New Zealand, Tru Design Long Thread Tails are the superior composite connection for fitting hose to threaded fittings. Tru Design Tails are moulded from a glass reinforced nylon composite. High strength,..
£7.71
Designed and made in New Zealand, Tru-Design Long Thread Tails are the superior composite connection for fitting hose to threaded fittings. Tru Design Tails are moulded from a glass reinforced nylon composite. High strength,..
£10.37
Designed and made in New Zealand, Tru Design Skin Fittings with Tail are the superior composite thru-hull solution. The Skin Fitting with Tail body and nut are moulded from glass fibre reinforced nylon composite. High strength,..
£13.56
Designed and made in New Zealand, Tru-Design Long Thread Tails are the superior composite connection for fitting hose to threaded fittings. Tru Design Tails are moulded from a glass reinforced nylon composite. High strength,..
£1.30
Designed and made in New Zealand, Tru-Design Long Thread Tails are the superior composite connection for fitting hose to threaded fittings. Tru Design Tails are moulded from a glass reinforced nylon composite. High strength,..
£3.85
Designed and made in New Zealand, Tru-Design Long Thread Tails are the superior composite connection for fitting hose to threaded fittings. Tru Design Tails are moulded from a glass reinforced nylon composite. High strength,..
£3.87
Designed and made in New Zealand, Tru-Design Long Thread Tails are the superior composite connection for fitting hose to threaded fittings. Tru Design Tails are moulded from a glass reinforced nylon composite. High strength,..
£4.80
Designed and made in New Zealand, Tru-Design Long Thread Tails are the superior composite connection for fitting hose to threaded fittings. Tru Design Tails are moulded from a glass reinforced nylon composite. High strength,..
£5.93
Designed and made in New Zealand, Tru-Design Long Thread Tails are the superior composite connection for fitting hose to threaded fittings. Tru Design Tails are moulded from a glass reinforced nylon composite. High strength,..
£7.18
Designed and made in New Zealand, Tru-Design Long Thread Tails are the superior composite connection for fitting hose to threaded fittings. Tru Design Tails are moulded from a glass reinforced nylon composite. High strength,..
£10.37
These fittings can be used on the Aquavalve, Aquavalve through Bulkhead, Electronic Aquavalve or 3 Way Connector.
£3.16
These fittings can be used on the Aquavalve, Aquavalve through Bulkhead, Electronic Aquavalve or 3 Way Connector.
£3.16
Designed to complement the Aquavalve range, these bends allow for the most efficient routing of hose connections to and from Aquavalves. The Aquavalve Bends have an exit angle of 90°. Manufactured from a glass reinforced nylon composite material..
£8.89
Designed to complement the Aquavalve range, these bends allow for the most efficient routing of hose connections to and from Aquavalves. The Aquavalve Bends have an exit angle of 90°. Manufactured from a glass reinforced nylon composite material..
£8.89
Designed to complement the Aquavalve range, these bends allow for the most efficient routing of hose connections to and from Aquavalves. The Aquavalve Bends have an exit angle of 120°. Manufactured from a glass reinforced nylon composite..
£8.89
Designed to complement the Aquavalve range, these bends allow for the most efficient routing of hose connections to and from Aquavalves. The Aquavalve Bends have an exit angle of 120°. Manufactured from a glass reinforced nylon composite..
£8.91
Tee Kit. Connects two intersecting 1 1/2"(38mm) hoses. Includes three Custom Hose Adapters (307341513).
£17.89
Wye Kit. Connects two intersecting 1 1/2"(38mm) hoses. Includes three Custom Hose Adapters (307341513)
£21.92
90° Bend Kit. Eliminates hose kink at sharp bend. Includes two Custom Hose Adapters (307341513).
£15.02
Designed and made in New Zealand, Tru Design Long Thread Tails are the superior composite connection for fitting hose to threaded fittings. Tru Design Tails are moulded from a glass reinforced nylon composite. High strength,..
£4.27
The Aquafix Wrap Repair Kit is an ideal addition to your onboard tool kit. It allows you to make emergency repairs to hoses and pipes up to 2 1/2" diameter using a water activated fibreglass tape that sets in 30 minutes...
£17.12
Vented loops are used predominantly in toilet to overboard applications, toilet inlet applications and holding tank to overboard applications. They can also be used in genset or small engine inlet cooling water systems...
£15.67
Vented loops are used predominantly in toilet to overboard applications, toilet inlet applications and holding tank to overboard applications. They can also be used in genset or small engine inlet cooling water systems...
£21.32
Vented loops are used predominantly in toilet to overboard applications, toilet inlet applications and holding tank to overboard applications. They can also be used in genset or small engine inlet cooling water systems...
£19.59
Sometimes you need to create a custom solution to a marine plumbing problem. These backing nuts are great for creating custom tank fittings utilising Tails, 90° Tails, or Threaded Connectors.
£2.90
Sometimes you need to create a custom solution to a marine plumbing problem. These backing nuts are great for creating custom tank fittings utilising Tails, 90° Tails, or Threaded Connectors.
£2.90
Sometimes you need to create a custom solution to a marine plumbing problem. These backing nuts are great for creating custom tank fittings utilising Tails, 90° Tails, or Threaded Connectors.
£3.20
Sometimes you need to create a custom solution to a marine plumbing problem. These backing nuts are great for creating custom tank fittings utilising Tails, 90° Tails, or Threaded Connectors.
£3.20
Sometimes you need to create a custom solution to a marine plumbing problem. These backing nuts are great for creating custom tank fittings utilising Tails, 90° Tails, or Threaded Connectors.
£2.08
Sometimes you need to create a custom solution to a marine plumbing problem. These backing nuts are great for creating custom tank fittings utilising Tails, 90° Tails, or Threaded Connectors.
£2.08
